Floor Lifts

Installation begins with identifying a support wall capable of anchoring the hydraulic drive tower, followed by cutting a floor opening on the second level that aligns precisely with the lift platform dimensions. The floor cap mechanism integrates flush with the surrounding flooring when closed, creating a level surface that prevents tripping hazards and maintains the visual continuity of the upstairs space. The hydraulic tower mounts vertically along the wall and powers the lift carriage through controlled fluid pressure.

Once the system is operational, you press and hold the control button to move the lift upward or downward, and the platform stops the moment you release the button. This constant-pressure design prevents unintended movement and gives you full control over speed and stopping position. The capped floor opening closes automatically as the lift descends, so the second floor remains a safe, uninterrupted walking surface when the lift is not in use.

The installation includes electrical work to power the hydraulic pump and structural reinforcement if the selected wall requires additional bracing to meet load specifications. The system does not require a separate machine room or pit excavation, as the hydraulic drive components mount directly to the wall and the lift travels through the existing floor structure once the opening is created.

Homeowners in Roseville frequently ask about structural requirements, floor modifications, and how the lift integrates into existing room layouts before committing to installation.

• What type of wall is required for the Telecab 17 installation? The lift mounts to a load-bearing interior wall that can support the hydraulic drive tower and the full operational load, which is verified through structural assessment before any cutting or mounting begins.
• How does the floor cap prevent accidental falls when the lift is downstairs? The cap mechanism closes flush with the second-floor surface when the lift descends, creating a continuous, level floor that eliminates open edges and maintains safe foot traffic across the entire upstairs area.
• Why does the Telecab 17 use constant-pressure buttons instead of a single-press control? Constant-pressure operation requires you to hold the button down throughout the entire lift travel, stopping movement immediately when you release it, which prevents runaway motion and gives you precise control over positioning at each floor level.
• What happens if power is lost while the lift is between floors? The hydraulic system includes a manual descent valve that allows controlled lowering of the platform to the lower floor without electricity, ensuring you are not stranded mid-travel during an outage.
• How large is the floor cut-out needed on the second level? The opening dimensions match the Telecab 17 platform size plus clearance for the capping mechanism, and exact measurements are determined during the pre-installation site assessment based on your specific floor joists and structural layout.